| Manufacturer |
|
New Holland Construction |
|
|
| Model Year |
|
2012 |
|
|
| Model |
|
U80B |
|
|
| MSRP |
|
Request a Quote
|
|
|
| DIMENSIONS | |
| Length |
|
General Purpose Bucket: 16.92 ft. (5.15 m)
4-1 Bucket: 16.67 ft. (5.09 m) |
|
|
| Height |
|
With General Purpose Bucket:
Fully Raised: 13.67 ft. (4.17 m)
Top of Canopy: 8.75 ft. (2.66 m)
With 4-1 Bucket:
Fully Raised: 14.25 ft. (4.35 m)
Top of Canopy: 8.75 ft. (2.66 m) |
|
|
| Width |
|
Over Tires (General Purpose):
11 L x 16: 79.3 in. (2.02 m)
12 L x 16.5: 81.1 in. (2.06 m)
17.5 L x 24: 81.7 in. (2.08 m) |
|
|
| Wheelbase |
|
4-1 Bucket:
2WD: 84 in. (2.13 m)
4WD: 84.5 in. (2.15 m) |
|
|
| Ground Clearance |
|
General Purpose & 4-1 Bucket: 10.9 in. (276 mm) at front axle |
|
|
| DRIVETRAIN | |
| Transmission Type |
|
4-speed synchromesh with hydraulically actuated clutches and electric F/R shuttle control, clutch disconnect buttons on the transmission shifter and loader control lever |
|
|
| Axles |
|
Reach from Front Axle:
General Purpose Bucket:
Centerline-bucket on Ground: 75.2 in. (1.91 m)
4-1 Bucket:
Centerline-bucket on Ground: 72.7 in. (1.85 m)
Maximum Clam Opening: 38.3 in. (972 mm)
Moldboard Height: 36.8 in. (934 mm) |
|
|
| Tires |
|
Front:
2WD: 11 L x 16.1, 10-ply rating
4WD: 12 L x 16.5, 8-ply rating
Rear (2WD / 4WD):
17.5 L x 24, 10-ply rating (standard)
19.5 L x 24, 10-ply rating (optional) |
|
|
| ENGINE | |
| Engine Type |
|
4-stroke, turbocharged |
|
|
| Engine Make |
|
FPT |
|
|
| Engine Model |
|
445T / MMG |
|
|
| Fuel Type |
|
Diesel |
|
|
| Bore x Stroke |
|
4.09 x 5.19 in. (109 x 132 mm) |
|
|
| Cylinders |
|
4 |
|
|
| Gross Horsepower |
|
85 hp (63 kW) @ 2,200 rpm |
|
|
| Net Horsepower |
|
79 hp (59 kW) @ 2,200 rpm |
|
|
| Displacement |
|
274 ci (4.5 l) |
|
|
| Torque |
|
Gross: 276 ft. lbs. (374 Nm) @ 1,500 rpm
Net: 270 ft. lbs. (366 Nm) @ 1,500 rpm
Rise (at rated speed): 33% |
|
|
| Cooling |
|
System: 3.5 gal. (15.8 l) |
|
|
| Fuel Tank Capacity |
|
31.4 gal. (119 l) |
|
|
| Rated Speed |
|
Full Load: 2,200 rpm
Low Idle: 850 - 1,000 rpm
High Idle (no load): 2,300 - 2,450 rpm |
|
|
| Speed Forward |
|
1st: 3.8 mph (6.1 km/h)
2nd: 6.9 mph (11.1 km/h)
3rd: 13 mph (21 km/h)
4th: 25.2 mph (40.5 km/h) |
|
|
| Speed Reverse |
|
1st: 3.8 mph (6.1 km/h)
2nd: 6.9 mph (11.1 km/h)
3rd: 13 mph (21 km/h)
4th: 25.2 mph (40.5 km/h) |
|
|
| BATTERY | |
| Voltage |
|
12V, negative ground |
|
|
| Amps |
|
Alternator: 90A (1.25 kW) |
|
|
| HYDRAULICS | |
| Hydraulic System |
|
Pump: Gear type, transmission mounted, direct drive to engine crankshaft |
|
|
| Hydraulic Tank Capacity |
|
Total: 20.25 gal. (77 l) |
|
|
| Reserve Capacity |
|
Reservoir (w/ filter): 14.5 gal. (54.9 l)
Reservoir (w/o filter): 14 gal. (53 l) |
|
|
| OPERATIONAL | |
| Dig Depth |
|
General Purpose:
Bucket Flat: 7.8 in. (199 mm)
4-1 Bucket:
Bucket Flat: 7.1 in. (180 mm)
Clam Open: 4.4 in. (111 mm) |
|
|
| Height to Bucket Pin |
|
General Purpose Bucket:
Fully Raised: 11.17 ft. (3.4 m)
At SAE Carry: 12.8 in. (325 mm)
4-1 Bucket:
Fully Raised: 11.17 ft. (3.4 m)
At SAE Carry: 14.6 in. (372 mm) |
|
|
| Dump Reach |
|
At Full Height, 45 in. Dump:
General Purpose (bucket): 25.9 in. (657 mm)
4-1 Bucket (bucket): 25.4 in. (644 mm)
4-1 Bucket (clam open): 11.9 in. (302 mm) |
|
|
| Dump Angle |
|
At Full Height: 45° |
|
|
| Bucket Breakout Force |
|
General Purpose Bucket:
Lift: 9,271 ft. lbs. (41,239 N)
Dump: 9,607 ft. lbs. (42,734 N)
4-1 Bucket:
Lift: 8,766 ft. lbs. (38,993 N)
Dump: 10,325 ft. lbs. (45,928 N) |
|
|
| Bucket Rollback |
|
General Purpose:
At Ground Line: 40 in.
At SAE Carry: 45 in.
4-1 Bucket:
At Ground Line: 40 in.
At SAE Carry: 45 in.
At full height adjustable for both buckets |
|
|
| Lifting Force |
|
Lift Capacity to Full Height:
General Purpose: 6,537 lbs. (2,956 kg)
4-1 Bucket: 6,537 lbs. (2,971 kg) |
|
|
| Total Cycle Time |
|
Raise to Full Height: 5.3 sec.
Bucket Dump: 1.1 sec.
Power Down: 2.4 sec.
Return-to-Dig: 3.2 sec.
4-1 Clam Open: 2.28 sec.
4-1 Clam Close: 3.13 sec. |
|
|
Specs, Quotes, Overview
Standard Features
